Filter
Top Products
2120
Using the Belkin Wireless Networking Utility
2120
Using the Belkin Wireless Networking Utility
Configuring your Belkin Wireless G USB Network
Adapter to use Security
At this point, you should already have your wireless router (or access
point) set to use WPA or WEP. In order for you to gain a wireless
connection, you will need to set your Wireless G USB Network
Adapter to use the same security settings.
Changing the Wireless Security Settings
The Belkin Wireless G USB Network Adapter supports the latest WPA
security feature as well as the legacy WEP security standard. By
default, wireless security is disabled.
To enable security, you will first need to determine which standard is
used by the router or access point. (See your wireless router’s or access
point’s manual for directions on how to access the security settings.)
To access the security settings on your Adapter, click the “My
Connections” tab and point to the connection for which you want to
change security settings. Click “Edit” to change settings.