Filter
Top Products
Hookup and Installation
Step 5
Connect your Pay-Per-View/Phone Line
Your PureAV Power Conditioner comes equipped with
Pay-Per-View/phone-line protection with a built-in splitter. These are standard
RJ11 phone jacks and are labeled “Phone”.
A. Connect one end of your telephone cable to the wall outlet to which you
normally connect your phone line. Connect the other end of your telephone
cable to the Power Conditioner phone jack labeled “IN”.
B. Connect one end of the PureAV phone cable (included) to the Power
Conditioner phone jack labeled “OUT”. Connect the other end of this cable
to the Pay-Per-View phone jack on your DSS receiver.
C. To connect a telephone – Connect one end of another phone cable to the
other Power Conditioner phone jack labeled “OUT”. Connect the other end
of this cable to the telephone you want to use.
Note: We have included labels for the “Phone IN” and “Phone OUT” lines
if needed for better organization.
PureAV Power Conditioner
9