Filter
Top Products
8
The OmniView
™
SE has the capability to be daisy-chained to additional units for control over
more computers. Up to four OmniView
™
SE units can be daisy chained together, whether
2-Port, 4-Port, or a mixture of both. The example above shows two OmniView
™
SE 2-Port units
and two OmniView
™
SE 4-Port units daisy-chained together.
Each OmniView
™
SE unit is defined as a BANK. See diagram above for more information.
BANK numbers range from 0 to 3 for a total of 4 BANKs. BANK 0 is the MASTER bank, while
banks 1 through 3 are slave banks. The MASTER bank is the unit that connects to the console
keyboard, mouse, and monitor.
The DIP switches must be set correctly for proper identification and usage. See page 5 for the
actual settings. If you are using the OmniView
™
SE in a single-unit configuration, it must be
set as the MASTER (BANK 0). If it is to be used as a slave unit, then it must be set to any
unused unique bank number from 1 through 3.
CONSOLE
Keyboard,
mouse and
monitor
Bank 0 (Master)
Bank 1 (slave)
Bank 2 (slave)
Bank 3 (slave)
12
3456
78910
11 12
(SKIP IF YOU HAVE ONLY ONE OmniView
™
SE)
Usage
P73039_F1D102-eng_man.qxd 9/26/00 3:42 PM Page 8