Filter
Top Products
8 How to assemble your monitor hardware
3. How to assemble your monitor hardware
If the computer is turned on you must turn it off before continuing.
Do not plug-in or turn-on the power to the monitor until instructed to do so.
1. Unpack the package and place the monitor stand
firmly.
2. Attach the monitor to the stand until it locks.
Align the grooves on back of the monitor against the tabs
on the monitor stand, and then push the monitor forward
until you hear a clicking sound.
3. Fully extend and tilt the monitor to rotate it.
The monitor is now locked at the lowest position, and you
have to press Lock down / release button on the bottom
rear of stand to move the monitor up to the maximum
extended position.