Filter
Top Products
Operation52
Function Description
Audio Settings
Mute
Volume
Power On/Off Ring Tone
See "Adjusting the sound" on page 41 for details.
Standby Monitor
Out
Selecting On enables the function. The projector can output a
VGA signal when it is in standby mode and the COMPUTER 1
(or COMPUTER) and MONITOR OUT jacks are correctly
connected to devices. See "Connecting a monitor" on page 19
for how to make the connection.
Enabling this function slightly increases the standby power
consumption.
Lamp Settings
Lamp Mode
See "Setting Lamp Mode as Economic" on page 55 for details.
Reset Lamp Timer
See "Resetting the lamp timer" on page 59 for details.
Equivalent Lamp Hour
See "Getting to know the lamp hour" on page 55 for details on
how the total lamp hour is calculated.
Security
Settings
Change Password
You will be asked to enter the current password before
changing to a new one. See "Utilizing the password function"
on page 27 for details.
Power On Lock
See "Utilizing the password function" on page 27 for details.
Baud Rate
Selects a baud rate that is identical with your computer's so
that you can connect the projector using a suitable RS-232
cable and update or download the projector's firmware. This
function is intended for qualified service personnel.
Test Pattern
Selecting On enables the function and the projector displays
the grid test pattern. It helps you adjust the image size and
focus and check that the projected image is free from
distortion.
5. SYSTEM SETUP: Advanced menu