Filter
Top Products
Operation 39
Function Description
Quick Auto
Search
See "Switching input signal" on page 23 for details.
Presentation
Timer
Reminds the presenter to finish the presentation within a certain time
frame. See "Setting the presentation timer" on page 30 for details.
Language
Sets the language for the On-Screen Display (OSD) menus. See "Using
the menus" on page 20 for details.
Projector
Position
The projector can be installed on a ceiling or behind a screen, or with
one or more mirrors. See "Choosing a location" on page 13 for details.
Menu
Settings
Menu Display Time
Sets the length of time the OSD will remain active after your last key
press. The range is from 5 to 30 seconds in 5-second increments.
Menu Position
Sets the On-Screen Display (OSD) menu position.
Reminder Message
Sets the reminder messages on or off.
Operation
Settings
Direct Power On
Allows the projector to turn on automatically once the power is fed
through the power cord.
Auto Power Off
Allows the projector to turn off automatically if no input signal is
detected after a set period of time. See "Setting Auto Power Off" on
page 44 for details.
Instant Restart
Selecting On enables you to restart the projector immediately within
90 seconds after turning it off.
This function is only available when Quick Cooling is off.
Quick Cooling
Enables or disables the Quick Cooling function. Selecting On enables
the function and projector cooling time will be shortened from a
normal 90-second duration to approximately 30 seconds.
Blank Timer
Sets the image blank time when the Blank feature is activated, once
elapsed the image will return to the screen. See "Hiding the image" on
page 31 for details.
Sleep Timer
Sets the auto-shutdown timer.
3. SOURCE
4. SYSTEM SETUP: Basic menu