Filter
Top Products
Operation 41
Hiding the image
Press the Eco Blank button from projector or remote control to turn off the image for a
period of time with up to 70% lamp power saving. Press any key on the projector or
remote control to restore the image.
The word "Eco Blank" appears at the screen while
the image is hidden. When this function is activated
with an audio input connected,the audio can still be
heard.
• Eco Blank: Save up 70% of your lamp power.
Time to do your part in saving the planet.
The automatic switch to Eco Blank Mode after the
projector is turned on for over three minutes without a display source, eliminating
unnecessary energy waste and prolonging the life of the projector lamp
You can set the blank time in the
SYSTEM SETUP: Basic > Operation Settings >
Blank Timer
menu to let the projector return the image automatically after a period of
time when there is no action taken on the blank screen. The length of time can be set from
5 to 30 minutes in 5-minute increments.
Do not block the projection lens from projecting as this could cause the blocking object to
become heated.
No matter Eco Blank Timer is activated or not, you can press any key (except the
Page Up/
Down
key) on the projector or remote control to restore the picture.
Freezing the image
Press on the remote control to freeze the image.
The word 'FREEZE' will display in the screen. To
release the function, press any key (except the
Page
Up/Down
key) on the projector or remote control.
Even if an image is frozen on the screen, the pictures
are running on the video or other device. If the
connected devices have active audio output, you will
still hear the audio even though the image is frozen
on screen.