Filter
Top Products
Introduction 11
Remote control
1. ON/OFF
Toggles the projector between standby mode
and on.
2
. Source selection buttons (COMPUTER-1,
C
OMPUTER-2, VIDEO, S-VIDEO)
Selects an input source for display.
3
. MENU/EXIT
Turns on the On-Screen Display (OSD)
menu. Goes back to previous OSD menu,
exits and saves menu settings.
4
. BLANK
Used to hide the screen image.
5
. Left/
Starts the FAQ function.
6. MODE/ENTER
Selects an available picture setup mode.
Activates the selected On-Screen Display
(OSD) menu item.
7
. LASER
Emits visible laser pointer light for
presentation purposes.
8
. PAGE UP/PAGE DOWN
Operates your display software program
(on a connected PC) which responds to
page up/down commands (like Microsoft
PowerPoint).
9
. FREEZE
Freezes the projected image.
1
0. NETWORK SETTING
Enters network setting directly.
1
1. TEST
Displays the test pattern.
1
2. NETWORK
Searches the network signal and project it
within a few seconds once available.
1
3. SOURCE
Displays the source selection bar.
1
4. AUTO
Automatically determines the best
picture timings for the displayed image.
15. Keystone/Arrow buttons ( / Up, /
Down)
Manually corrects distorted images
resulting from an angled projection.
1
6. Right/
Locks the buttons on the projector.
When the On-Screen Display (OSD)
menu is activated, the #5, #15 and #16
buttons are used as directional arrows to
select the desired menu items and to
make adjustments.
11
6
8
10
1
2
3
4
5
7
9
20
16
17
19
18
23
22
21
15
15
14
13
12