Filter
Top Products
Operation 57
Function Description
Teaching
Template
Provides several preset patterns for various teaching purposes.
Choose B
lackboard or Whiteboard first by pressing / and press
/ to choose the pattern you need. Press E
NTER to display the
selected pattern.
Picture Mode
Pre-defined picture modes are provided so you can optimize your
projector image set-up to suit your program type. See
"Selecting a
picture mode" on page 31
for details.
Reference
Mode
Selects a picture mode that best suits your need for the image quality
and further fine-tune the image based on the selections listed on the
same page below. See
"Setting the User 1/User 2 mode" on page 31 for
details.
Brightness
Adjusts the brightness of the image. See "Adjusting Brightness" on page
32
for details.
Contrast
Adjusts the degree of difference between dark and light in the image.
See
"Adjusting Contrast" on page 32 for details.
Color
Adjusts the color saturation level -- the amount of each color in a video
image. See
"Adjusting Color" on page 32 for details.
This function is only available when a Video, S-Video or
Component Video signal is selected.
Tint
Adjusts the red and green color tones of the image. See "Adjusting Tint"
on page 32
for details.
This function is only available when a Video or S-Video signal is
selected and the system format is NTSC.
Sharpness
Adjusts the image to make it look sharper or softer. See "Adjusting
Sharpness" on page 32
for details.
This function is only available when a Video, S-Video or
Component Video signal is selected.
Brilliant Color
See "Adjusting Brilliant Color" on page 32 for details.
Color
Temperature
There are four color temperature settings available. See "Selecting a
color temperature" on page 32
for details.
3D Color
Management
See "3D Color Management" on page 33 for details.
Save Settings
Saves the settings made for User 1 or User 2 mode.
1. DISPLAY menu
2. PICTURE menu