Filter
Top Products
Introduction 11
Remote control
1. ON/OFF
Toggles the projector between standby mode
and on.
2. Source selection buttons (COMPUTER-1,
COMPUTER-2,
VIDEO, S-VIDEO)
Selects an input source for display.
3. MENU/EXIT
Turns on the On-Screen Display (OSD)
menu. Goes back to previous OSD menu,
exits and saves menu settings.
4. BLANK
Used to hide the screen image.
5. Left/
Starts the FAQ function.
6. MODE/ENTER
Selects an available picture setup mode.
Activates the selected On-Screen Display
(OSD) menu item.
7. LASER
Emits visible laser pointer light for
presentation purposes.
8. PAGE UP/PAGE DOWN
Operate your display software program
(on a connected PC) which responds to
page up/down commands (like Microsoft
PowerPoint).
9. FREEZE
Freezes the projected image.
10. NETWORK SETTING
Enters network setting directly.
11. TEST
Displays the test pattern.
12. NETWORK
Searches the network signal and project it
within a few seconds once available.
13. SOURCE
Displays the source selection bar.
14. AUTO
Automatically determines the best
picture timings for the displayed image.
15. Keystone/Arrow buttons ( / Up, /
Down)
Manually corrects distorted images
resulting from an angled projection.
16. Right/
Locks the buttons on the projector.
When the On-Screen Display (OSD)
menu is activated, the #5, #15 and #16
buttons are used as directional arrows to
select the desired menu items and to
make adjustments.
11
6
20
16
17
19
18
8
10
23
22
21
1
2
3
4
5
7
9
15
15
14
13
12