Filter
Top Products
Maintenance38
Step 6. Re-install the lamp cover and tighten the
screw. D
D
o not turn the power on with the
lamp c
mp c
over remo
mo
ved. Whenever the lamp
is replaced, reset the total lamp operation
time. D
D
o not reset if the lamp i
lamp i
s not
replaced as this could cause dama
use dama
ge.
Step 7. R
R
eset the lamp counter
i. Press and hold Exit
Exit
on the projector
for 3 seconds to display the total used
lamp time.
ii. Press Me
Me
nu on the projector or on
the remote control to access the lamp
hour timer. An adjustment message
will appear.
iii. Press W or X to reset lamp hours
and press EXIT
EXIT
to leave.
Te mp Information
When the Temperature warning light is on, it is warning you of the following possible prob-
lems:
1. The internal temperature is too high.
2. The fans are not working.
Turn the projector off and contact qualified service personnel for further help.
For more detailed information, please refer to "Indicators" on page 38.
Indicators
Illustration
1. Blank -
-
: Light OFF
2. : Light flashing
3. : Light ON
4.
O : Orange light
5.
R : Red light
6.
G : Green light