Filter
Top Products
23
Using the projector
English
Personalizing the projector menu display
The On Screen Display (OSD) menus can be set according to your preferences. These settings do not affect the
projection settings, operation, or performance.
• Language in Setup menu sets your familiar language for the on-screen menus.
• You can select the projector’s Background Color from purple, black or white in Options menu.
• OSD Off (Secs) in Options Menu sets the length of time the OSD will remain active after the last button
press.
• Sleep Timer (Min) in Options menu sets the length of time the projector will auto shutdown.
• OSD Position H and OSD Position V in Options menu adjust the OSD position on the screen.
Saving and loading the video memory
• Press the video memory buttons on the remote control or MEMORY c on the
projector to recall the settings directly.
• There are four video settings: MEMORY 1, MEMORY 2, MEMORY 3, and
DEFAULT. The DEFAULT button can be used to restore the default settings for
the current input source.
• See page 29 for information about saving user memories.
Tu r ni n g t he p ow er of f
To turn the projector off, press the POWER button on the projector or
remote control and a warning message appears. Press POWER again.
• The Power indicator light flashes green and the fans run for about two
minutes to cool the lamp. The projector will not respond to any
commands until the cooling process is complete.
• Then, the Power indicator light is a steady orange once the cooling
process has finished and fans stop.
• If the projector will not be used for an extended period, turn the main
power switch off and unplug the power cable from the power outlet.
ENTER
1
2
3
W10000-en.book Page 23 Thursday, October 19, 2006 1:45 PM