BenQ W1080ST Projector User Manual


 
42
Using the projector
Picture menu
Function Description
Preset Mode
Pre-defined picture modes are provided so you can optimize your projector
picture set-up to suit your program type. See "Selecting a preset mode" on
page 30 for details.
User Mode
Management
Selects a preset mode that most suits your need for the picture quality and
further fine-tune the picture based on the selections listed below. See "Setting
the User 1/User 2/User 3 mode" on page 30 for details.
Brightness
Adjusts the brightness of the picture. See "Adjusting Brightness" on page 31 for
details.
Contrast
Adjusts the degree of difference between dark and light in the picture. See
"Adjusting Contrast" on page 31 for details.
Color
Adjusts the color saturation level -- the amount of each color in a video
picture. See "Adjusting Color" on page 31 for details.
Tint
Adjusts the red and green color tones of the picture. See "Adjusting Tint" on
page 32 for details.
Sharpness
Adjusts the picture to make it look sharper or softer. See "Adjusting Sharpness"
on page 32 for details.
Color Temperature
There are several color temperature settings available. See "Selecting a color
temperature*" on page 32 for details.
Lamp Power
Selects the projector lamp power between Normal, Economic and
SmartEco modes.
Advanced...
Black Level
Sets the picture grayscale as 0 IRE or 7.5 IRE. See "Setting Black Level" on
page 33 for details.
Clarity Control
See "Controlling image clarity" on page 33 for details.
Color Temperature Fine Tuning
See "Setting a preferred color temperature" on page 33 for details.
Gamma Selection
See "Selecting a Gamma setting" on page 33 for details.
Brilliant Color
See "Adjusting Brilliant Color" on page 34 for details.
Color Management
See "Color Management" on page 34 for details.
Reset Picture Settings
Returns all settings in the Picture menus to the factory preset values. See
"Resetting the picture mode" on page 31 for details.