Filter
Top Products
VoIP/(802.11g) ADSL2+ Router
Chapter 4: Configuration
Confirm Password: Re-enter the password for confirmation.
Display Name: This parameter will be appeared on the Caller ID.
Codec Preference
Codec is known as Coder-Decoder used for data signal conversion. Set the priority of voice
compression; Priority 1 owns the top priority.
G.711µ-LAW: It is a basic non-compressed encoder and decoder technique. µ-LAW uses pulse
code modulation (PCM) encoder and decoder to convert 14-bit linear sample. 64kbps bandwidth
is needed.
G.711A-LAW: It is a basic non-compressed encoder and decoder technique. µ-LAW uses pulse
code modulation (PCM) encoder and decoder to convert 13-bit linear sample. 64kbps bandwidth
is needed.
G.729: it is used to encoder and decoder voice information into a single packet which reduces the
bandwidth consumption. 8kbps bandwidth is needed.
Note: Codec priority is assigned in the order as G.729 > G.711µ-LAW > G.711A-LAW
Speed Dial
It is for you to store frequently used telephone numbers which you can press number from 0 to 9 and the
pound sign (#) to activate this function. For example, speed dial to phone number lists on 9, just press 9
then #. Your router will automatically call out to number listed on entry 9.
Indicate remote user’s IP address or domain name if this remote user does not register in the SIP server.
If remote user is registered in the SIP server, this field is related to the SIP server’s IP / Domain name.
For examples:
If your friend Tim gives you a SIP URL as sip: 89755@192.246.69.223 then you can fill in as
89755@192.246.69.223.
If your friend Felix gives you a SIP URL as sip: felix@iptel.org then you can fill in as
felix@iptel.org.
If your friend Greg gives you an IP address "192.246.56.56" only, then you can fill in as
“192.246.56.56”. In case, some of users may use DDNS, you can fill in with domain name as well.
76