Billion BiPAC 2071 / 2072 Homeplug AV 200 Ethernet series
Hardware Overview
The LEDs
The Connector
* Lit when connected to an Ethernet
device.
* Blinking when data is transmitted
or received via Ethernet port.
* Lit when the power line
sync is established.
* Blinking when
networking is active.
* Connect your device (e.g.: computer, router,
hub , IP pone, IPTV set-top-box, gaming
consoles…) to a LAN port, using the included
RJ-45 Ethernet cable
* Lit when powe
r
is ON
* Blinking when detecting
HomePlug 1.0 device
*Reset Button: Hold
down the reset button
for 1~3 seconds to
reset device to factory
default.
* Power line sync
- 4 -