Filter
Top Products
Page 16
724-746-5500 | blackbox.com
IC401A User Manual
Chapter 3: Installation
3.5 Connecting a USB Device
1. Install any software required to operate the USB device(s). Refer to the
documentation for the USB device(s), as required.
2. Connect the USB device to the device port on the REX unit.
3. Check that the device is detected and installed properly in the operating
system.
3.6 Compatibility
The extender complies with USB 1.1 and USB 2.0 specifications governing the
design of USB devices. However, we do not guarantee that all USB devices are
compatible with the extender, because there are a number of different
configurations that may impact the operation of USB devices over extended
distances.