![](http://pdfasset.owneriq.net/d/3a/d3a08bf8-288a-49dc-9907-9c3a549ded98/d3a08bf8-288a-49dc-9907-9c3a549ded98-bg27.png)
Black Box Console Server user guide 39
Set up procedure
To manually set up an IP address proceed as follows;
1. Set up a terminal or PC running terminal emulation. For examples of connection
pinouts see Appendix A Cabling information.
If you connect via the Admin Port you will see a display of diagnostic and bootup
messages.
Note that if you cannot emulate VT100, you will have to use the Command Line
Interface (cli); (the cli commands are described in full in Appendix B The CLI
commands).
2. At the console, with the login prompt displayed, type admin and press <return>.
3. At the password prompt, now displayed type superuser and press <return>. This
is the default admin user password.
The command line prompt will now be displayed:
4. At the command prompt type screen and press <return> to enter Full Screen
mode.
The main menu is now displayed:
5. At the main menu, select ‘server configuration’. (alternatively, use the cli
command set server)
The server form will be displayed as shown in the next picture: