Filter
Top Products
74
Modem 34336
Table 4-4. Responses To Diagnostic Port Commands.
RESPONSE MEANING
ERROR Command error (incomplete, wrong syntax, etc.). (If
CONNECT or CON is issued without an address or *, the
modems will not connect, and there will be no ERROR
message.)
ADDRESS g,u The Modem has connected with diagnostic port of modem
at address g,u (group and unit). Address may be
preceded by A, S, or both—see below.
A One or more modem alarms has been detected. An alarm
indicates a condition that may require attention (power
loss, loss of carrier, etc.).
S Valid statistics have been collected on a call or attempted
call. Statistics include information such as call duration
call, signal quality level, etc.
RESET Response to RESET command. Prompt ( >) appears when
reset is complete.