Filter
Top Products
ServSwitch Agility and Agility Dual
724-746-5500 | blackbox.com
Page 20
3.2.4 Local AUX Port
The AUX port is an RS232 serial port that allows extension of RS232 signals up to a baud rate of 115200. The port has software
flow control, but no hardware flow control.
1 Ensure that power is removed from the ServSwitch Agility unit.
2 Connect a suitable serial ‘null-modem’ cable (see Appendix D for pin-out) between a vacant serial port on your computer and
the AUX port on the right hand side of the ServSwitch Agility rear panel. See Figure 3-9.
AUX
Figure 3-9. Connecting the serial link cable to Local unit socket.
Serial (null-modem) link
from the host computer