Black Box ACS4222A-R2-xx Network Hardware User Manual


 
SERVICE SETUP
31
4. Service Setup
For most applications, you shouldn't need not to make any adjustments to set up your DVI-D
Fiber KVM-KVM-Extender. Under some special circumstances it could be necessary to setup
configuration specials.
For some applications, you may need to open the Local Unit and/or the Remote Unit.
Unscrew the Philips-type screws at both sides at the bottom of the device. Carefully displace
the lower and upper shells of the case.
The diagnostic LED ‘Video OK’ is located at the local unit between the both DVI connectors
The diagnostic LED ‘Link Status’ is located near to the Fiber-connectors
Fastening
screw on the
bottom of the
device
Fastening
screw on the
bottom of the
device
Diagnostic LED
Video OK
Diagnostic LED
Link Status
(Fiber)