Filter
Top Products
724-746-5500 | blackbox.com
724-746-5500 | blackbox.com
Page 33
AVX-HDMI-WI
Chapter 5: Web Management
1. Click the “Network Setup” button, and the screen will show the network setting items.
NOTE: Auto-Configuration Network Setup on WHPS.
The default setting of the WHPS box is DHCP client. When the WHPS box is connected to a LAN that already has a DHCP server
present, the WHPS box takes an IP address assigned to it by the server. When the WHPS box is connected to a LAN that does not
have a DHCP server, the WHPS box becomes the DHCP server in the network.
IP Setup
• You can select “Obtain IP address automatically” or “Use the following IP address.”
• IP Address: The default value is 192.168.100.10.
• Subnet Mask: The default value is 255.255.255.0.
• Default Gateway: The default value is 192.168.100.10.
• DNS Server: The default value is 192.168.100.10.
DHCP Server Setup
• You can select “Auto (Enable/Disable DHCP Server” or “Disable.”)
• Start IP: The start IP address of DHCP Server.
• End IP: The end IP address of DHCP Server.
• Subnet Mask: The default value is 255.255.255.0.
• Default Gateway: The default value is 192.168.100.10.
• DNS Server: The default value is 192.168.100.10.
Wireless Setup
• Wireless LAN: The default value is “Enable.”
• Region: Default value is “Worldwide.”
• SSID: SSID string, max. Length is 32 bytes.
• SSID Broadcast: The default value is “Enable.”
• Channel: To set fixed channel or Auto. The “Auto” means that after WHPS powers on, it will scan all wireless channels and
select one clear channel automatically.
• Encryption: You can select “Disable” or one of WEP/WPA/WPA2 64-bit or 128-bit in ASCII or HEX string.
• Key: If Encryption is enabled, you have to set the key value according to the encryption mode you selected.
SNMP
You can select the “Enable” or “Disable” option to set the SNMP function. The SNMP community password will sync with the
Admin password.
Channel Bandwidth
• 20 Hz: You can select “20 Hz” to enable the link speed to reach 150 Mbps.
• Auto: You can select “auto” to enable the link speed to reach 300 Mbps.
NOTE: Your PC also needs to support the bandwidth.