Filter
Top Products
Contents
1 - INSTALLATION 5
Unpack the router 5
Select a Site 5
Identify the Connectors 6
Connect to the Console 7
Make the LAN Connections 7
Make the WAN Link Connection 7
Power Up the router 9
Login and Enter the Required Configuration 9
Mandatory Configuration 10
Setting the Link Interface Type (Universal WAN only) 11
Setting the T1/E1Parameters (T1/E1 WAN only) 12
Identify the Status LEDs 15
2 - TYPICAL APPLICATIONS & HOW TO CONFIGURE
THEM 17
Managing the router Using Menus 18
Conventions 19
Basic Frame Relay Configuration 20
Auto Learning the Frame Relay Configuration 22
Manual Configuration - LMI Type 23
“Quick Start” Frame Relay 24
Basic Leased Line Configuration 26
“Quick Start” PPP Leased Line Connections 26
Should You Bridge or Route? 29
Configure as an Ethernet Bridge 30
Configure as an Ethernet IP router 33
Define an IP Default Gateway 35
Define an IP Static Route 36
Define an IP Subnet Mask 37
Configure as an Ethernet IPX router 40
Novell Servers in Both Locations 40
Novell Servers in One Location Only 42
PPP Link Configuration Overview 44
Numbered Links 44
Unnumbered Links 45
Configure Dynamic Host Configuration Protocol 46
Configure Network Address Translation (NAT) 48
Configure PPP Security 50
Configure Firewall 52