Filter
Top Products
724-746-5500 | blackbox.com Page 21
Chapter 5: Installing the Battery
5. Installing the Battery
Batteries are not included. Use only an alkaline 9-volt battery. When installing a new
battery, disconnect any test cables connected to the Cable Length Meter. (See
Figure 5-1.)
1. Using a #2 Phillips screwdriver, unscrew the battery cover screw and remove the
battery cover on the back of the unit.
2. Remove the old battery from the battery compartment and detach the battery cap.
3. Connect a new alkaline 9-volt battery to the battery cap.
4. Slide the battery into the cavity.
5. Close the battery cover and replace the screw. Do not overtighten.
Battery
cover screw
Battery
cover
Cable Length
Meter, back view
Figure 5-1. Battery installation.