Filter
Top Products
724-746-5500 | blackbox.com
724-746-5500 | blackbox.com
Page 75
EME144A-R2
Chapter 8: Frequently Asked Questions (FAQs)
Question: How do I set up my routing table?
Answer: To set up the routing table, open a DOS window (start, run type command press enter) and at the command prompt,
then enter: >route add 192.168.0.100.10.1.1.20
Where 10.1.1.20 is the IP address of the Ethernet interface on the PC that the unit is plugged into with the crossover cable.
Now ping* 192.168.0.100 to see if the connection was successful.
Question: How can I change my administrator password?
Answer: If you want to make your unit more secure and change the administrator password from the default (public) to your
own choice, follow these steps:
1. Log into your unit using the default password.
2. Click the “Settings” tab.
Figure 8-6. Select change password option.
3. Change the password.
Figure 8-7. Change user and/or admin passwords.