Filter
Top Products
14 EncrypTight Manager Installation Guide
Disaster Recovery Option
If this cluster is going to have a disaster recovery site assigned to it then you need to modify the
following section of the /opt/scripts/policyserver-init.conf:
########################################################################
#######
#######
####### Disaster Recovery options
#######
#
## When this
server will use a disaster recovery site set the following:
heartbeatEnabled=true
disasterEnabled=true
disasterHost=192.168.80.X - THE IP OF THE DISASTER RECOVERY SERVER
# disasterUser=pserver
# disasterPass=pserver
# heartbeatPort=8764
#
#
## When this
server IS the disaster recovery site set the following:
# disasterServer=true
# disasterServerUser=admin
# heartbeatInterval=30000
## comma separated list of hosts to check
# heartbeatHosts= COMMA SEPARATED LIST OF SERVERS IN THE MAIN SITE
#
#
###############################################################################
Run the installation scripts:
It is important that the ordering of IP addresses stays the same for node1 and node2 on both machines in
the cluster.
Be sure that the following TCP and UDP ports are available between each server in the cluster:
TCP 21
TCP 2221
TCP 22
TCP 80
TCP 8080
TCP 443
TCP 8443
TCP 8764
TCP 5432
TCP 47788
TCP 47799
UDP 45588
UDP 46688
UDP 45599
UDP 46699