Filter
Top Products
BLACK BOX
®
Media Converter Switches Installation and User Guide
45
The connection procedure is straightforward. Simply insert the DC leads to the
LBH100H’s power terminals, positive (+) and negative (-) screws. The use of Ground
(GND) optional; it connects to the LBH100H chassis. Ensure that each lead is securely
tightened from the top, as shown here.
NOTE: Always use a voltmeter to measure the voltage of the incoming power supply
and figure out the +ve potential lead or -ve potential lead. The more +ve potential lead
will connect to the post labeled “+ve” and the rest to the “-ve”.
The GND can be hooked up at the last.
When power is applied, the green PWR LED will illuminate.
3.8 Connecting Ethernet Media
The LBH100A and LBH110A-series Media Converter Switches can be connected
to two media types i.e. fiber and copper (RJ-45) types, runt at 100BASE-TX, 10BASE-T
and 100BASE-FX, or 10BASE-FL. CAT 5 cables should be used when making 100BASE-