Black Box LES110BA Server User Manual


 
Web Terminal Selecting Web Terminal enables web browser access to the serial port via Manage:
Devices: Serial using the Management Console's built in AJAX terminal. Web Terminal
connects as the currently authenticated Management Console user and does not re-
authenticate. See section 13.3 for more details.
Authenticate Enable for secure serial communications using Portshare and add password
Accumulation Period By default, once a connection is established for a particular serial port (such as a
RFC2217 redirection or Telnet connection to a remote computer) then any incoming
characters on that port are forwarded over the network on a character by character basis.
The accumulation period changes this by specifying a period of time that incoming characters
will be collected before then being sent as a packet over the network.
Escape Character This enables you to change the character used for sending escape characters.
The default is ~.
Power Menu This setting enables the shell power command. A user can control the power connection
to a Managed Device from command line when they are connected to the device via telnet
or ssh. To operate, the Managed Device must be set up with both its Serial port connection
and Power connection configured. The command to bring up the power menu is ~p
Single Connection This setting limits the port to a single connection> If multiple users have access
privileges for a particular port, only one user at a time can access that port (that is, port
“snooping” is not permitted).
4.1.3 SDT Mode
This setting allows port forwarding of RDP, VNC, HTPP, HTTPS, SSH, Telnet, and other LAN protocols
through to computers that are locally connected to the console server by their serial COM port. Port
forwarding requires that you set up a PPP link over this serial port.
_____________________________________________________________________
724-746-5500 | blackbox.com Page 53