Filter
Top Products
configure access to network connected Hosts that the user is authorized to access
and set up (for each of these Hosts) the services (for example, HTTPS, IPMI2.0) and
the related IP ports being redirected.
configure access to the console server itself (this is shown as a Local Services host).
configure access with the enabled services for the serial port devices connected to
the console server.
Note The Retrieve Hosts function will auto-configure all user classes (that is, they can be members
of user or admin or some other group or no group. SDT Connector will not auto-configure the
root (and we recommend that you only use this account for initial config and to add an initial
admin account to the console server).
6.2.4 Make an SDT connection through the gateway to a host
Simply point at the host to be accessed and click on the service to use to access that host. The
SSH tunnel to the gateway is then automatically established, the appropriate ports redirected
through to the host, and the appropriate local client application is launched pointing at the local
endpoint of the redirection:
_____________________________________________________________________
724-746-5500 | blackbox.com Page 107