Filter
Top Products
724-746-5500 | blackbox.com Page 19
Chapter 4: Installation
4.1.2 LGC200A
Plug the SFP module into the LGC200A as shown in Figure 4-2.
Figure 4-2. Plug the SFP module into the LGC200A.
LGC200A
LGC200A,
LGC201A or
LGC202A
Device A
Device B
Twisted-pair
cable
Twisted-pair
cable
Multimode or
single-mode
fiber optic cable
Figure 4-3. Transmits and receives data between two LGC200A converters
or one LGC200A and one LGC201A/LGC202A.
NOTE: Two LGC200A with the same SFP modules can be used in pairs.
NOTE: LGC200A could be connected to LGC201A or LGC202A; however, the SFP
module in the LGC200A must use the same mode and wavelength as the
opposite end. The fiber connectors depend on the type of SFP installed. See
Table 4-1.