Black Box LGC201A Network Hardware User Manual


 
724-746-5500 | blackbox.com
Page 8
Chapter 2: Overview
2. Overview
2.1 Introduction
The Pure Networking LGC200A, LGC201A and LGC202A are Gigabit Media
Converters. The SFP port of the LGC200A supports hot-swappable, Gigabit SFP
modules. The LGC201A has a dual SC multimode fiber connector, and the LGC202A
has a dual SC single-mode fiber connector.
Use the media converters to join a 1000BASE-TX segment to a 1000BASE-SX or
1000BASE-LX segment on your network, or use them in pairs to extend the
328-feet (100-m) distance limitation of copper-based Ethernet.
Three converter models are available:
• LGC200A: This SFP module media converter transmits/receives data based on the
SFP module that is installed.
• LGC201A: This fiber SC media converter transmits/receives data by 850-nm
short-wave laser over multimode fiber.
• LGC202A: This fiber SC media converter transmits/receives data by 1310-nm
short-wave laser over single-mode fiber.
2.2 Features
• Complies with 802.3ab and 802.3z standards.
• Provides (1) SC/LC connector or (1) SFP module slot and (1) RJ-45 connector.
• Both TX and FX ports work at 1000 Mbps in full-duplex mode.
• Supports Auto MDI/MDI-X for the TX port.
• Extends fiber distance up to 0.55 kilometers for multimode fiber and 15 kilometers
for single-mode fiber.
• Easy-to-view LED indicators provide status to easily monitor network activity.
• Uses a 9-VDC, 600 mA external power supply (included).