Filter
Top Products
724-746-5500 | blackbox.com
Page 18
G.SHDSL Four-Wire Ethernet Network Extender Kit
4.3.2. System Status Screen
DSL mode: Indicates the current DSL mode setting.
Speed setting: Indicates the current DSL speed setting.
Speed actual (kbps): Indicates the actual DSL speed in kilobits per second.
Link status of Pair #1: Indicates the DSL connection status (either up or down) for Pair #1.
Link status of Pair #2: Indicates the DSL connection status (either up or down) for Pair #2.
Noise margin of Pair #1 (dB): Indicates the noise margin in dB of Pair #1.
Noise margin of Pair #2 (dB): Indicates the noise margin in dB of Pair #2.
Line attenuation of Pair #1 (dB): Indicates the line attenuation value in dB of Pair #1. The maximum value is 43 dB when
the DSL distance is 22,500 ft. on 26 AWG cable.
Line attenuation of Pair #2 (dB): Indicates the line attenuation value in dB of pair #2. The maximum value is 43 dB when
the DSL distance is 22,500 ft. on 26 AWG cable.
Activation state of Pair #1 (dB): Indicated the DSL startup activation state of Pair #1. The value starts from 05 and gradually
reaches the final value of 16. The value of 16 is the DSL linkup state value. The general activation
state sequence is 05 20 10 12 16.
Activation state of Pair #2 (dB): Indicated the DSL startup activation state of Pair #2. The value starts from 05 and gradually
reaches the final value of 16. The value of 16 is the DSL linkup state value. The general activation
state sequence is 05 20 10 12 16.
System Status
DSL Mode: STU-C 2 Pair
Speed Setting: Adaptive
Speed Actual (kbps): 4608
Link Status of Pair #1: up
Link Status of Pair #2:
Noise Margin of Pair #1 (dB): 08
Noise Margin of Pair #2 (dB):
Line Attenuation of Pair #1 (dB): 22
Line Attenuation of Pair #2 (dB):
Activation State of Pair #1: 16
Activation State of Pair #2:
[ESC] quit
Figure 4-10. System Status screen. This example shows the values for 26 AWG cable.