Filter
Top Products
18
NET ACCESS BROADBAND ROUTER W/4-PORT SWITCH QUICK START GUIDE
9. The Asynchronous Port Function dialog box appears (see Figure 3-6). Select
from Remote Access, IP Routing (NAT Enabled), or IP Routing (NAT
Disabled).
Figure 3-6. Asynchronous Port Function dialog box.
• Select Remote Access to allow remote users to dial-in to the network to access
resources as if the remote user is connected to the network locally. Continue
with the Remote Access instructions on the next page.
• Select IP Routing (NAT Enabled) to allow all users in the two IP segments
(LAN and WAN Ethernet) to share one IP address to the Internet. You may
also select this option to use the async port for dial-up backup in the event the
DSL or cable becomes unavailable. (See page 22.)
NOTE
The IP Routing (NAT Enabled) feature of the async port is valid only if
the WAN port is configured as NAT Disabled.
• Select IP Routing (NAT Disabled) to connect other IP segments through the
async port. Proceed to the IP Routing instructions (see page 22).
Click Next>>.