Filter
Top Products
27
CHAPTER 3: Software Installation and Configuration
16. The Note dialog box appears (see Figure 3-14). It indicates that you have
completed the Setup Wizard.
Figure 3-14. Note dialog box.
Read the “IMPORTANT!” information contained in the dialog box. Click
Run Monitor (recommended), Run Manager, or Exit.
3.3 Testing Your Connection
When you select Run Monitor, the Broadband Monitor program loads.
1. To test your current settings, select Test Connection. Select Connect Port 1 to
test the WAN port. Select Connect Port 2 to test the async port. The monitor
activity will appear in the display window. Refer to the Broadband Monitor
chapter in the User Guide for additional information about the Router’s
monitoring capabilities.
2. Before using the device, you must configure your workstations for TCP/IP.
Refer to the LAN Client Settings chapter of the User Guide for configuration
information.