Filter
Top Products
95
3-MBPS WIRELESS ETHERNET HUBS, ADAPTERS, AND BRIDGES
5.1.5 WLAN P
ARAMETERS
The WLAN Parameters Menu contains the following
sub-menus:
Hopping Sequence
The hopping sequence is a parameter that is set for
the Hub. The stations learn it from the Hub at the
association process.
Changing this parameter is useful when several Hubs
are co-located. This reduces the probability of frame
collision between co-located cells.
Range
The Hopping Sequence must be in the range
between 1 and 22.
Default Value
The default value is 1.
Access Rights
This value is read-write on the Hub, and read-only on
the stations.