Filter
Top Products
724-746-5500 | blackbox.com
724-746-5500 | blackbox.com
Page 7
SmartPath Enterprise Wireless Access Point, Outdoor Installation Guide
Figure 5. Attach the plane bracket and the base bracket.
3. Thread the open end of the hose strap through the two tabs on the base bracket.
4. Tighten the hose clamp with a 1/4” (2 cm) slotted screwdriver or a 5/16” (8 mm) drive socket (or nut) driver.
Figure 6. Install the hose strap.
5. Connect the grounding cable to the grounding lug on the unit, as shown in Figure 10. Connect the other end of the cable to
an appropriate ground.
When attaching the LWN602WA to a horizontal pole, such as the arm of a street light, make sure that the face of the device is
perpendicular to the earth for optimal RF coverage.
Figure 7. Line up the unit so it’s perpendicular to the earth when mounted on a horizontal pole.