Black Box MD403A Modem User Manual


 
17
3.2.3 I
NSTALLATION IN
W
INDOWS
98
1. Power up your Windows 98 system.
2. If you have not already done so, connect a) the modem to your computer’s
USB port and b) the telephone line to your modem and a telephone wall
jack.
3. Windows will detect that the new modem is present and launch the Add New
Hardware Wizard. The first screen indicates that the wizard will search for a
USB driver.
4. Place the Modem Installation CD into your CD drive and click Next > to
proceed with the installation.
5. The Add New Hardware Wizard dialog box appears with the message “What
do you want Windows to do?” Verify that the “Search for the best driver for
your device (recommended)” option is selected and click Next >.
6. The Add New Hardware Wizard dialog box appears with the message
“Windows will search for a new driver…” Verify that the “CD-ROM drive”
option is selected and click Next >.
7. The Add New Hardware Wizard dialog box indicates that Windows has found
an updated driver for this device. Verify that the “Updated driver
(recommended)” option is selected and click Next >.
8. The Add New Hardware Wizard dialog box indicates that Windows will select
the proper driver from the Installation CD and verify the information. Click
Next > to install the selected driver.
9. After the files have been copied to your PC, an Add New Hardware Wizard
screen appears. It tells you that Windows has finished installing the driver.
Click Finish to complete the installation and exit the wizard. The TR LED on
your modem will light when the installation is complete. Remove the
Installation CD from the computer.
CHAPTER 3: Installation