Filter
Top Products
19
SHM-B ASYNC
easiest access to the terminals, switches, etc.
After a SHM-B Card is wired, it can then be inserted into
an open slot in the SHM-B rack. Be certain that the circuit
board has mated with the power pins on the SHM-B rack before
applying force to fully seat the board; otherwise you may
damage the board and power pins.
When all boards have been wired and plugged into the
rack, plug the wall transformer into its power source.
You should be able to communicate as described in
Chapter 4. When all channels are operating, attach the
SHM-B Rack front panel by first aligning the plunger
latches with their respective holes in the rack. Press on
the top and bottom of the panel to properly seat it, then
firmly press in all six of the plunger latches to retrain the
panel.