Filter
Top Products
Note The option to directly send SMS alerts via the cellular modem was included in the Management
GUI in V3.4. Advanced console servers already had the gateway software (SMS Server Tools 3)
embedded however you this could only be accessed from the command line to send SMS
messages.
7.5.3 Send SNMP trap alerts
The Administrator can configure the Simple Network Management Protocol (SNMP) agent that resides
on the console server to send SNMP trap alerts to an NMS management application:
Select Alerts & Logging: SNMP
Enter the SNMP transport protocol. SNMP is generally a UDP-based protocol, though
infrequently, it uses TCP instead.
Enter the IP address of the SNMP Manager and the Port to use for connecting (default = 162)
Select the version being used. The console server SNMP agent supports SNMP v1, v2, and v3.
Enter the Community name for SNMP v1 or 2c. An SNMP community is the group that devices
and management stations running SNMP belong to. It helps define where information is sent.
SNMP default communities are private for Write (and public for Read).
To configure for SNMP v3, you will need to enter an ID and authentication password and contact
information for the local Administrator (in the Security Name).
Click Apply to activate SNMP.
_____________________________________________________________________
724-746-5500 | blackbox.com Page 145