Filter
Top Products
31
CD1: All phone book entries
CD2: ABC
CD3: DEF
CD4: GHI
CD5: JKL
CD6: MNO
CD7: PQRS
CD8: TUV
CD9: WXYZ
Press the up/down track button of your radio
to change the individual entries.
Select the desired entry with the PTT button,
and press the PTT button a second time to
make the call.
The call starts and you can hear the contact
person over the loudspeakers of the car sound
system.
You can cancel or end by pressing the PTT button
again.
Audio streaming via BT
Activate the audio streaming on your cell phone
or BT streaming transmitter. Use PIN 1234. If the
PIN of your BT streaming transmitter is perma-
nently set to "0000", you can also adjust the inter-
face to this PIN, see the Settings menu.
During the audio streaming, the OLED display
shows "STREAM".
For some BT streaming transmitters with remote
control option (BT AVRCP, Audio Video Remote
Control Profi le), it is possible to jump to the pre-
vious/next track by turning the rotary button to
the left or right or pressing the left/right radio
button.
•
•
•
•
•
•
•
•
•
➜
➜
MP3 or WAV playback via USB
You can connect a USB removable media drive
with MP3 and/or WAV fi les to the interface to
play the MP3 or WAV fi les via the car sound sys-
tem. The car sound system must be switched on.
During a hands-free telephone call and with active
audio streaming, the USB playback is interrupted.
By turning the button left or pressing the radio
button <, you jump to the start of the track cur-
rently playing (playback time > 3 sec.) or to the
previous track.
By turning the button right or pressing the radio
button >, you jump to the next track.
Forward and reverse can be done as before with
a long press on the Right or Left button of your
radio.
Mix, Repeat and Scan settings should also be per-
formed on your radio.
Playback lists (M3U playlists) are recognised
in all directories and processed, not only in the
BLAUPUNKT directory. They are handled similar to
directories. Sorting is done by memory sequence.
During the MP3 playback, the OLED display
shows additional information from the MP3 fi les
("ID3 tags"). In the Settings menu, you can se-
lect different views and confi gurations for this
purpose. If ID3 tags to be displayed should not be
fi lled out in MP3 fi les (e.g. no track), the note "No
Track" is displayed.
During the WAV playback, the fi le name (dis-
play = 1 line) or fi le name in line 1 and directory
name in line 2 (display = 2 lines) is automatical-
ly shown.
The following scan rates are supported:
8 kHz, 11.025 kHz, 12 kHz, 16 kHz, 22.05 kHz,
24 kHz, 44.1 kHz, 48 kHz
The control of the playback is identical to that of
MP3 fi les.
In TXT or MD mode, ID3 text display in radio dis-
play. Setting via confi g.txt, see Loading a confi g-
uration fi le.
BTUSBIFPTT_545_500_GB_1208.indd 31BTUSBIFPTT_545_500_GB_1208.indd 31 19.12.2008 9:27:39 Uhr19.12.2008 9:27:39 Uhr