INTEGRUS | Installation and User Instructions | 6-Channel interpreter desk with loudspeaker en | 1
Bosch Security Systems | 2005-04 | 9922 141 70164en
1 6-Channel interpreter desk
with loudspeaker
(LBB 3222/04)
1.1 Introduction
The LBB 3222/04 6-channel interpreter desk provides
listening and speaking facilities for interpreters using
the CCS 800, CCS 400 or non-BOSCH discussion
systems. Up to 12 desks can be connected to an
Integrus transmitter using the Integrus audio input and
interpreters module (LBB 3422/20). It can distribute
up to 6 outgoing languages. An ‘auto-floor’-feature is
incorporated for relay interpretation. This allows a less
well-known floor language to be translated by one
interpreter into a language familiar to all other inter-
preters and relayed as the auto-floor.
The LBB 3222/04 has an integral loudspeaker and is
supplied with a microphone incorporating an illuminat-
ed status ring to warn everyone in the booth that the
microphone is active. Two outgoing channels are pro-
vided, A and B, switchable by means of a channel
select key.
1.2 Front panel controls
The desk has the following front-panel controls and
indicators (see figure 1.1):
Figure 1.1:
1. Microphone activating key - 2-position toggle
switch for activating the microphone. An interlock
facility can be enabled (using the under-panel con-
trols) that prevents the microphone being activated
if the desk’s outgoing language distribution channel
is occupied by another desk.
2. Microphone status indicators - Two red LEDs to
indicate that the microphone is active.
3. Microphone mute key - A non-locking push-but-
ton to temporarily mute the microphone. When
pressed, the status indicators and status ring are
‘off’, but the outgoing language distribution channel
remains occupied by the desk.
4. Microphone - Gooseneck microphone with inte-
gral status indicator ring.
Figure 1.1 LBB 3222/04 6-channel interpreter desk
Note: Flashing indicators warn that the
language channel occupied by this desk
is also being used by one or more other
desks.