Filter
Top Products
24 en | Installing the Monitor Small Size LCD/LED Monitors
F.01U.134.499 | 1.0 | 2009.07 User Manual Bosch Security Systems, Inc.
5.2.2 Wall Mount Installation
This monitor can be wall-mounted using the square mounting
holes (75 mm [2.95 in.] centers) and a suitable wall mount or
swivel/tilt mount.
Figure 5.2 Location of mounting holes
5.3 Connecting the Composite Video Signal to
the Monitor
There are two (2) BNC connectors located on the rear side
panel of the monitor for composite video inputs and two (2)
BNC connectors for composite video outputs (see Figure 3.2
and Figure 3.3).
Note: All video inputs are passive loop-through. The impedance
is automatically set to 75 Ohm by the input of the signal on the
input connector, while operating in a single connection mode
(see Figure 5.5). If a cable is also connected to the output
connector, the video signal can be passed on to another
monitor connected to it via the passive loop-through function.