Filter
Top Products
General Purpose LCD Monitors Navigating the Monitor | en 21
Bosch Security Systems, Inc. User’s Manual F.01U.127.338 | 2.0 | 2009.05
7.6 Setup Menu
To access the Setup menu, press the Menu button on the front panel of the monitor, then
press the left and right arrows to select the Setup icon. Press the up and down arrows to
select the Setup submenu.
Table 7.5 Setup Menu
Submenu Definition
Picture Mode
(Video Mode)
Selects the automatic picture control mode. Choices are:
Custom: User selected values of the Custom menu are applied.
Dynamic: Automatically adjusts the Brightness, Contrast, and Sharpness, maximizing
the video quality in the picture.
Standard: Applies factory default values.
Picture Mode (PC
Mode)
Selects the automatic picture control mode. Choices are:
Custom: User selected values of the Custom menu are applied.
High: Uses the following values: Brightness = 70, Contrast = 80
Middle: Uses the following values: Brightness = 60, Contrast = 70.
Low: Uses the following values: Brightness = 50, Contrast = 60.
Color Tone Selects the color temperature. Choices are: Cool 9300K, Normal 6500K, Warm 5000K.
Mute Enables/disables audio. Choices are: On and Off.
Volume Controls built-in speaker output volume (range 0-100).
Size (Video Mode) Selects the Aspect Ratio Control mode. Choices are: 4:3, Panorama, Zoom1, Zoom2,
Wide.
DNR (Video Mode) Turns Noise Reduction On or Off. Turning this feature OFF reduces the video quality
slightly, but improves the monitors response time to MOTION.
PC (PC Mode) Selects between Auto or manual adjustment of the desktop screen. Auto Adjust: Auto
synchronizes screen to graphics adaptor.
Manual choices are: Phase (range 0-100), H-Position (range 0-100), V-Position (range
0-100), Frequency (range 0-100).
3D Comb
(Video
Mode)
Activates the 3D comb filter.
Setup
Reset
Language English
OSD Tone Blue
Blue Screen Off
Key Lock Off
Firmware Version X.XX
:Move :Input :Menu