BOXLIGHT CP-13t Projector User Manual


 
12
CONNECTING THE PROJECTOR
ON
1
2
3
4
56
DIP
CONNECTING TO THE COMPUTER
To connect with the computer, refer to the figure below.
IBM-compatible computers or Macintosh computers (VGA / SVGA / XGA / SXGA)
VGA Cable
Monitor Output
Desktop type
Laptop type
Monitor
Audio Speaker
(stereo)
Audio Amplifier
Control Cable for Serial Port
Control Cable for PS/2 Port
Audio Cable (stereo)
Monitor Cable
Terminal Terminal
Serial port PS/2 port Audio Output Audio Input
To each terminal of your computer
To the Monitor
NOTE :
When connecting the cable, the power cords of both the projector and the external equipment should be disconnected
from AC outlet. Turn the projector and peripheral equipment on before the computer is switched on.
MAC Adapter
Set the slide
switches following
the chart on the
next page.
Terminal
ADB port
Control Cable for ADB Port
• VGA CABLE
• CONTROL CABLE FOR PS/2 PORT
• CONTROL CABLE FOR SERIAL PORT,or ADB PORT
• MAC ADAPTER
• MONITOR CABLE
• PC AUDIO CABLE (stereo)
These cables are not supplied with this projector.
Used cables for connection