Filter
Top Products
14
Using the Projector
Using the Keypad and Remote Buttons
While the menus are displayed, the
source
and
reset
buttons on
the keypad and the up and down arrow buttons on the remote
act as menu navigation and adjustment buttons and the
menu/select
button acts as a select button. See “Using the On-
Screen Menus” on page 16 for details.
FIGURE 11
Keypad and remote buttons
Menu/select
NOTE: If you have turned Auto
Source off (page 22), you may
need to press the source button
more than once to display an
active source. The sources switch
in this order: data analog, data
digital, S-video, and composite
video.
Press the
menu/select
button to open the on-screen menus. Press
menu/select
again (while Exit is highlighted) to close the menus.
(The menus automatically close after 30 seconds if no buttons are
pressed.) When you close the menus, the projector saves any
changes you made. For more information about the on-screen
menus, see page 16.
Source (keypad only) or Data and Video (remote only)
When you have more than one source (computer and video) con-
nected to the projector, select between them by pressing the
source
button on the keypad or the
data
or
video
button on the
remote.
menu/select
source
reset
LED
data
video
keystone
forward
back
menu/select