Filter
Top Products
22
Using the Projector
Control Menu
To access the Control menu settings, press the
menu/select
button
to display the Main menu, press the down arrow to highlight
Control, then press
menu/select
again to access the Control menu.
FIGURE 17
Control menu
Auto Source
When this feature is On, the projector automatically finds the
active source, checking the default source first. When this feature
is Off, the projector defaults to the source selected in Default
Source. To display another source, you must manually select one
by pressing the
source
button on the keypad or the
data
or
video
button on the remote.
Highlight
Auto source
,
press
menu/select
, then press the up or
down arrow buttons to turn this feature off and on.
Default Source
This determines which source the projector checks first for active
video during power-up. Select among Data-Analog, Data-Digital,
composite video, and S-Video.
Highlight
Default source
, press
menu/select
, use the up or down
arrows to cycle through the options, then press
menu/select
to
select.