Filter
Top Products
8 Quick Operator’s Guide Edition 7/06
Operating panel
BP-PR PLUS series
4.2.2 Power-Save mode
If the printer is not used for some time, it switches to Power-Save mode automatically.
The display shows the graphic and button illumination is switched off.
To exit Power-Save mode:
⇒ Press any button on the navigator pad.
4.2.3 Button functions
Tab. 2: Button functions
Button State Function
menu Ready Go to offline menu (see “Configuration Instructions“)
feed Ready Advances an empty label
pause Ready Repeat printing of last label
Printing Label Pause print job,
printer switches to Pause mode
Pause Continue print job,
printer switches to Printing Label mode
Fault - correctable Continue print job after error recovery,
printer switches to Printing Label mode
cancel Ready Clear print buffer,
repeated printing of the last label is then not possible
Printing Label
Pause
Fault - correctable
Fault - irrecoverable
Press briefly→ cancel current print job
Press and hold→ cancel current print job and delete all
print jobs
System error Press → if the error occurs repeatedly, notify the Service
Department
↵ button Fault - correctable
Fault - irrecoverable
Call up help→ brief information on error recovery is dis-
played
Offline menu Press briefly to enable value selection on the parameter
level, accept a selected value or start a function
Press and hold (> 2 sec.) to exit the parameter level without
accepting the parameter setting
W Offline menu Select menu items on a menu level or to select values on the
parameter level
Press button on the top menu level several times, if neces-
sary, to switch from the offline menu to Ready mode
X Offline menu Select menu items on a menu level or to select values on the
parameter level
S
T
Offline menu Reach a higher or lower menu level or set values on the
parameter level