7
Step 4: Connecting the EcoCart
TM
to the mains
Feed the IEC connector end of the supplied 2m mains lead through the hole in
the side of the trolley.
ECO CART L16V & L20V
← ECO CART L16V & L20V Models
Plug the mains lead into the IEC socket on the side of
the power module.
ECO CART L30H Model →
Plug the mains lead into the IEC socket located at the
bottom of the centre pillar on the right hand side.
ECO CART L30H
Plug the trolley’s mains lead in to a switched wall socket and switch ON.
Switch on the unit’s own ON/OFF switch located above the mains lead input.
IMPORTANT - Ensure the wall socket switch is in the OFF position before
connecting and removing the mains plug
NOTE: When the unit is first turned ON, or after the mains power has been switched off, the unit will automatically
divert to constant charging mode. To set the 24 hour timer, refer to Step 5 & 6 below.
IMPORTANT
Before moving the unit, first ensure the mains lead is disconnected from the wall
socket and wrapped around the provided cable winder.