Filter
Top Products
8
Energy Saving 24 Hour Timer
All EcoCart
TM
models are fitted with an energy saving programmable 24 hour timer (ECO CART L30H models feature
2 individual timer units). Each timer features 2 timer options allowing you to set your unit to automatically start
charging over 2 separate time periods in one 24 hour period. This could be from 6:30am to 8:30am ready for
morning classes and then again at 12pm to 1pm ready for afternoon classes. The timer can also be set be set to
charge your laptops during the evening or weekend to take advantage of off-peak energy supply hours, helping to
reduce your electricity bills.
All ECO CART L30H models feature 2 individual timer units. Each of these units manages the charging time for 15 of
the laptops charged inside the cabinet. This enables you to set the unit so that all 30 laptops charge at once or you
can set different charging times for each set of 15 laptops. NOTE: Due to the built in power management system on
the EcoCart
TM
, all 30 laptops can be charged at one time without the risk of tripping your building circuits.
Step 5: Setting the 24 hour Clock
First check the 24 hour clock is showing the correct time.
To adjust the time, press & hold the control knob in until the clock starts flashing
(Minimum 10 seconds). Then turn the control knob until the correct time is
reached & press the control knob in again to set.
LED Indicator Lights Guide:
Charging
When this LED is ON, it indicates that the unit is receiving
power and charging is in progress. When flashing the
charging start time is set and charging will commence
within 2-3 minutes.
Timed Charging (Flashing)
When this LED is flashing it indicates that a timer selection
has been made.
Timer 1: ON Time (Flashing: This timer ON)
When this LED is flashing it indicates that the unit is
charging and that Timer 1 is selected.
Timer 1: OFF Time
This LED is normally OFF and only comes ON when setting
the Charging Finish time of Timer 1.
Timer 2: ON Time (Flashing: This timer ON)
When this LED is flashing it indicates that the unit is
charging and that Timer 2 is selected.
Timer 2: OFF Time
This LED is normally OFF and only comes ON when setting
the Charging Finish time of Timer 2.