Filter
Top Products
9
OPERATING YOUR BREVILLE HANDY MIX DIGITAL™
BEFORE FIRST USE
Remove and safely discard any packaging
material and promotional stickers before
using the appliance for the fist time. Wash
the whisk, beaters and dough hooks in warm
soapy water with a soft cloth. Rinse and dry
thoroughly. The whisk, beaters and dough
hooks are also dishwasher safe. Wipe the
motor body with a damp cloth then dry
thoroughly.
NOTE
When first using your hand mixer,
you may notice an odor coming from
the motor. This is normal and will
dissipate with time.
USING THE HAND MIXER
Step 1
Ensure the ‘ON/OFF’ switch is in the ‘OFF’
position and the power cord is unplugged
from the power outlet.
Step 2
Align the desired attachment shaft (whisk,
beaters, dough hooks) with the attachment
sockets on the underside of the hand mixer.
Push firmly, turning slightly if required, until
they click into place.
The attachment shaft with collar should
be inserted into the larger hole, while the
attachment shaft without collar should be
inserted into the smaller hole.
COLLAR LARGER HOLE
NOTE
The whisk shaft has a collar and should
be inserted into the larger attachment
socket. Do not insert the wire whisk by
holding the wire end as this may cause
damage to the wires. Do not use the
whisk with any other attachment.
Step 3
Select a mixing bowl large enough to
accommodate the attachments, as a
bowl that is too small will damage the
attachments. Add ingredients to the mixing
bowl as directed in the recipe.
Step 4
Insert the power plug into a 110/120V power
outlet.
Step 5
Place the attachment (whisk, beaters, dough
hooks) into the ingredients inside the
mixing bowl. To commence mixing, move
the ‘ON/OFF’ switch to the ‘ON’ position.
Push the ‘Increase Speed’
button until
you have reached the required speed. If you
wish to make the speed slower at any time,
push the ‘Decrease Speed’
button.
The LCD screen will display the selected
speed as well as the mixing time that has
elapsed.
NOTE
Always begin mixing on a lower
speed setting to prevent splattering,
increasing to the desired speed for the
mixing task.
BHM500XL_IB_A10.indd 9 17/09/10 11:07 AM