Filter
Top Products
Setting up
12
1
Plug the charger into the mains.
2 Place the handset into the charger. The
handset display shows the moving charging
icon.
3 When the battery is fully charged the
charging icons stop moving and begin to
flash.
7 Customising your DECTfax Plus
Your BT DECTfax Plus can be customised to
suit your personal requirements. You can
customise your Dect/fax /plus in two ways;
Step by step - by using the
OK/Menu, and
ᮡ
and
ᮢ
buttons to scroll through the on-screen
menus.
Direct access - by pressing the
OK/Menu button
and then entering the number of the required
function.
Most instructions in this user guide are based
on the ‘direct access’ method, which is a more
effective way of operating your fax machine.
To print out a list of all the functions of the
DECTfax Plus, which allows you to see them at
a glance, along with the function codes to carry
them out, see ‘Printing out the functions list’ on
page 47.
There are a number of buttons which are used
to access the functions of your DECTfax Plus:
Button What it’s used for
Accesses the function menus
Confirms an entry or option
and selects the current menu
Exits the function menus. Any
changes which were not
confirmed will not be saved
Scrolls up through the menus
Scrolls down through the menus
Moves the cursor right or selects
a displayed menu item
Moves the cursor left and deletes,
and takes you back through menu
layers
Enables you to exit the current
function or go back through
the menus
Battery low warning
If, during a call, the battery charge is running low,
the handset beeps every 4 seconds.